Summit-audio ECS-410 Everest Channel Strip Instrukcja Użytkownika Pobierz pdf (Strona 18)

18 Summit Audio, Inc.

Mz2 - Microphone & Instrument Preamplifier

Pad Switch

This switch engages or disengages a –20dB pad to set the input

sensitivity of the microphone input.

Input Meter

The 10-segment input meter indicates the signal level at the input

of the preamp. The top red LED indicates hard clipping.

Hi-Z Input

This input can be used to mix in a musical instrument or other

high impedance signal. The Hi-Z input is always routed to the

tube section.

TouchPatch Indicator

This LED lights to indicate that the Preamp section is routed to the

internal DriveBus.

Outputs of any section are always active, even if routed via Touch-

Patch. If not routed via TouchPatch inputs as well as outputs are

active.

Polarity Switch

This switch inverts the polarity of the microphone input in order to

compensate for out of phase equipment or wiring.

+48V Phantom Power Switch

This switch enables +48 volt phantom power to the microphone

input. Turn the unit off to bleed off the voltage.

Warning: Some micro-

phones (notably ribbon mics)

cannot tolerate phantom power

and may be damaged. Check

the microphone’s specifications

and requirements before using

phantom power.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Brak uwag

Summit-audio ECS-410 Everest Channel Strip Instrukcja Użytkownika Strona 18